[JTR-FT11, FF11]Heavy Duty Steam Trap (MECHANICAL TYPE) Old Model: JKD-DT1,DT2
JTR-FT11, FF11 type trap is a float type and is applicable for the place where much amount of drain is expected such as heat exchangers, low pressure piping for dryers or headers.
详细描述
■ FEATURES
1. JTR-FT11, FF11 type trap is a float type and is applicable for the place where much amount of drain is expected such as heat exchangers, low pressure piping for dryers or headers.
2. Since the sheet and disk is made of stainless steel, it has an excellent durability.
3. Since it is possible to remove the only the upper part of trap for inspection, it is easy to maintain.
4. Adapting a balance structure shows excellent drain ability without impact of back pressure.
5. Air bent is on the top of trap and prevent air binding.
■ MATERIAL
NO
PART NAME
JTR-FT11,FF11
1
Body
CAST IRON
2
Cover
CAST IRON
3
Seat
STAINLESS STEEL
4
Disc
STAINLEESS STEEL
5
Hold Guide
CAST BRONZE
6
Lever
C.STAINLESS STEEL
7
Ball Float
STAINLESS STEEL
8
Air Vent
STAINLESS STEEL
9
Gasket
ASBESTOS
10
Packing
TEFLON
11
Stem Guide
BRASS
12
Packing Nut
BRASS
■ SPECIFICATIONS
1.WORKING PRESSURE: MAX 5kgf/cm2 {0.5MPa}
2. WORKING TEM'P: MAX 160℃
3. CONNECTION:
JTR-FT11 : SCREWED
JTR-FF11 : FLANGED
4. HYDROSTATIC : 10 kgf/cm2 {1.0MPa}
